Home > News > Content
Nitinol Tube
- Jan 03, 2017 -

Nitinol Tube

The austenite finish temperature of the finished tube (active Af) with outer diameter in the range of 0.3 to 3.0 mm (0.012 to 0.12 in.) 

It shall be measured on representative full round tube sample(s) using the bend and free recovery method described in Test Method ASTM F 2082-15.

Please check the Mechanical Properties


Superelastic properties are measured per Test Method F 2516 at room temperature 22+/-2C 

Applicable Standard: ASTM F2633

Surface Finish

   Outer surface: oxide or center-less-ground.  

    Inner surface: Etched or oxide.

Other finishes can be discussed with Peiertech. 

Nominal Dimensions and Tolerances

Permissible Variation in OD or ID Dimensions *


Other variation in OD and ID can be discussed with Peiertech.


Nitinol tube can be delivered in either exact length or random length. For random length orders, a maximum and minimum length shall be discussed with Peiertech.


Straightness requirements and measurement methods shall be discussed with Peiertech. 

Permissible Outer and Inner Surface Imperfections

Outer and inner surface imperfections criteria on tubes shall be discussed with Peiertech. 

Any question feel free to contact us

Baoji Hanz Material Technology Co., Ltd.



Whatsapp,Wechat, Mobile:+86 18091719909

Email:  guanjunli@hanztech.cn

Copyright © Baoji Hanz Material Technology Co.,Ltd